Blanchard Equipment Logo
Blanchard Customer Portal Button Blanchard But Parts Now Button

Locations

Online Equipment Sales

220R LOADER

Loader

  • Compatible with 2032R and 2038R tractors
  • Quik-Park™ mounting system for easy on, easy off in minutes
  • Optional single-point hydraulic coupler lets you connect the hydraulics in one click, no fuss and no mess
  • Quik-Change bucket system allows fast attachment changeovers for moving from chore to chore




View Product Brochure



Features



Pivot pinPivot pin

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.

 

A nut ensures the pins remain in position.

 

A lubrication groove provides a path for lubrication.

 

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Quik-Park loader mounting systemQuik-Park loader mounting system
Quik-Park loader mounting systemQuik-Park loader mounting system

The 220R Loader is designed for easy removal/mounting to/from the tractor without tools.

 

The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.

 

To view a video of how the Quik-Park system works, click here.

 

NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

Specifications


Technical drawing 220r-loader
Current Model
Tractor
Model2032R, 2038R
Front tire23x8.50-14 4PR R4
Rear tire14-17.5 6PR R4
Front axle configuration
Wheelbase1725 mm
68 in.
Pump capacity20.2 L/min
5.3 gpm
Rated pressure17.23 MPa
2499 psi
Loader
Leveling configurationNon-Self Leveling
Bucket used1450 mm
57 in.
Bucket weight88 kg
194 lb
Lift capacity at full heightMeasured at pivot (U)
509 kg
1120 lb
Measured at 500 mm ahead of pivot (V)
365 kg
803 lb
Lift capacity at 59 in. (1500 mm)Measured at pivot (W)
589 kg
1296 lb
Measured at 500 mm ahead of pivot (X)
445 kg
979 lb
Boom breakout forceMeasured at pivot (Y)
886 kgf
1949 lbf
Measured at 500 mm ahead of pivot (Z)
618 kgf
1360 lbf
Bucket rollback force capacityAt maximum height (VV)
1044 kgf
2297 lbf
At 59-in. (1500-mm) lift height (XX)
1302 kgf
2864 lbf
At ground-level line (ZZ)
972 kgf
2138 lbf
DimensionsMaximum lift height (A)
2160 mm
85 in.
At full height - bucket level(B)
1999 mm
79 in.
At full height - bucket dumped (C)
1667 mm
66 in.
Overall length (I+F), ft (m)3076 mm
121 in.
Overall height in carry position (J)
Digging depth (H)149 mm
6 in.
ReachAt maximum height (D)
756 mm
30 in.
At ground level - bucket level (F)
1351 mm
51 in.
Bucket angleDump angle, degrees (E)
36 degree (angle)
Rollback angle, degrees (G)
34 degree (angle)
Dump angle, ground
115 degree (angle)
Cycle timesLoader raise, seconds
3.19 seconds
Loader lower, seconds
1.94 seconds
Bucket dump, seconds
4.76 seconds
Bucket rollback, seconds
2.91 seconds
×

Questions? Send us a message

question bubble

© COPYRIGHT 2020 BLANCHARD EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered ByEQHarvest logo

NOT SET